Shindaiwa 81532 - Manual (Page 3)

WARNING!
Use Good Judgment
ALWAYS wear eye protection to
shield against thrown objects.
NEVER run the engine when trans-
porting the unit.
NEVER run the engine indoors! Make
sure there is always good ventilation.
Fumes from engine exhaust can cause
serious injury or death.
ALWAYS clear your work area of trash
or hidden debris that could be thrown
back at you or toward a bystander.
ALWAYS use the proper cutting at-
tachment.
ALWAYS stop the engine immediately
if it suddenly begins to vibrate or shake.
Inspect for broken, missing or improper-
ly installed parts or attachments.
NEVER use a non-Shindaiwa ap-
proved cutting attachment.
ALWAYS keep the unit as clean as
practical. Keep it free of loose vegeta-
tion, mud, etc.
ALWAYS hold the unit firmly with both
hands when edging, and maintain con-
trol at all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug
wire before performing any mainten-
ance work.
Safety Instructions The Properly Equipped Operator
Always operate with
both hands firmly gripping
the unit.
Wear close-fitting clothing to
protect legs and arms. Gloves
offer added protection and
are strongly recommended.
Do not wear clothing or
jewelry that could get caught
in machinery
or underbrush.
Secure hair so it is
above shoulder
level. NEVER
wear shorts!
Wear hearing protection devices
and a broad-brimmed hat or
helmet.
Always wear eye protection such as
goggles or safety glasses.
Keep away from the rotating blade
at all times, and never lift a moving
attachment above waist-high.
Wear appropriate footwear (non-skid boots or shoes):
do not wear open-toed shoes or sandals. Never oper-
ate the unit while barefoot!
Keep a proper footing and
do not overreach—
maintain your balance at
all times during operation.
Always make sure the
appropriate cutting attachment
shield is correctly installed
and in good condition.
Figure 1