Sinclair Duro - Manual (Page 2)

2
1.0 Technical data/technical description
Power supply 120V AC
Power consumption 2000W, 18A
with current limitor
Number of strokes 8500 strokes/min
Sound pressure level 88 dB(A)
Sound energy level 101 dB(A)
Hand/Arm-Vibration 16 m/s2
Weight 35 lbs
Comes with Duro
® Stripper, 2 rigid blades, safety
goggles and tool kit. Case is optional.
2.0 Safety
The Sinclair Duro
® Stripper has Class 2 protective insulation. It meets the
following safety specifications:
DIN VDE 0740 CENELEC HD 400,
IEC 745, VBG 7j (National spec)
The machine has radio interference suppression to the standards:
76/889/EWG, 87/308/EWG
EN 55014
3.0 Safety Instructions
Disconnect the power supply before any maintenance is carried out.
Use only recommended blades and make sure the blade is sharp before starting.
Maintenance should be undertaken only by qualified personnel. Use only genuine
Sinclair parts.
Transport
Always remove the blade before transporting the machine.
CAUTION!!! Always wear ear and eye protectors! CAUTION!!!
Using this machine without ear and eye protectors may jeopardize or harm your
health. It may harm especially your ears and increase the risk of an accident.
PLEASE READ DETAILED SAFETY INSTRUCTIONS ON COLORED
SHEET BEFORE USING MACHINE!
3.1 Introduction
This operating manual should be used to receive the maximum benefit from
your Duro
® Stripper. Following these instructions will both extend the life of
your machine and reduce repair costs.