Sennheiser HSP 4 EN - Manual (Page 20)

19
Cleaning the contacts of the connection cable
Over time, salt deposits from sweat can build up on the connector
and the socket. Clean the connector and the socket using standard
isopropyl alcohol.
To loosen the connection:
̈
Slide the silicone tube aside.
̈
Insert your fingernail into the
join.
̈
Pull the connector and the socket
apart as shown.
̈
Moisten a small brush (bristle
brush or toothbrush) with
isopropyl alcohol.
̈
Carefully brush off the connector
and the socket and remove the
salt deposits.
̈
Rinse the connector and the
socket with isopropyl alcohol to
remove the remaining salt
deposits.
Book_HSP_2_4_xxxxxx_xxxx.book Seite 19 Montag, 19. Mai 2008 11:06 11