Sharp TINSE4633FCZZ - Manual (Page 31)

29
Printing a file
When removing printed output...
Remove the output horizontally so that it does not get caught on the
actuator for output tray full detection.
1 Execute printing from
TextEdit.
(1) Open the [File] menu.
(2) Select [Print].
In Mac OS 9, select [Print] from
the [File] menu of SimpleText.
2 Select print settings and click the [Print] button.
(1) Make sure the correct printer is selected.
The machine name that appears in the "Printer" menu is normally [SCxxxxxx].
In Mac OS X v10.6, it is normally [RDVxxxxxx]. ("xxxxxx" is a sequence of
characters that varies depending on your machine model.)
(2) Select print settings.
Click next to [Copies & Pages] and select each setting that you wish to
configure from the pull-down menu. The screen for the selected setting will
appear.
If the settings do not appear in Mac OS X v10.5 to 10.5.8 and v10.6, click
next to the printer name.
In Mac OS 9, click
next to [General] and select a setting from the pull-down
menu. The screen for the selected setting will appear.
(3) Click the [Print] button.
Printing begins.
(1)
(2)
(1)
(2)
(3)
03-1_Quick(Printer).fm 29 ページ ２００９年１０月７日 水曜日 午後４時１９分