Smeg WM40T-1 User Manual
Page 25
FAILURE
CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
Err 02
The program
ready light
blinks.
The water level
in your machine
is below heater.
The pressure of
your water
supply may be
low or locking.
Turn on the tap
to the end.Water
may be cut,
check it.If the
problem is still
continuing,your
machine will
automatically
stop after a
while.Unplug
your machine,
turn off the tap
and apply to the
nearest
authorized
service.
Err 03
The start/pause
light and
program ready
light blinks .
The pump has
failed or the
pump filter is
obstructed.
Clean the pump
filter.If the
problem
persists,apply to
the nearest
authorized
service.(*)
Err 04
The program
end light blinks .
Communication
error
Shut down your
machine and
unplug. Turn off
your tap and apply
to the nearest
authorized service.
(*) See the section regarding the maintenance and cleaning of your
machine.
52