Sunbeam SNV12CBRB - Manual (Page 8)

8
CHANGING THE DUST BAG
1
2
3
Turn off the cleaner and open the cover.
Hold the cover while removing the dust bag from the dust bag
holder.
Insert the new dust bag into the dust bag holder properly, as shown
in the picture. Close the cover.
Note: If no dust bag has been placed into the dust bag holder, the cover can not be closed.
BEFORE ASKING FOR SERVICE
Before asking for service, please check each item below if you have trouble with your cleaner.
PROBLEM CHECK POINT MEASURE
Suction power is weak.
Dust bag
Pipe or hose If dirt bag is dirty, replace it.
If clogged or blocked, remove object.
The cleaner does not work.
Power cord
ON/OFF switch Check if power cord is plugged in.
Check if the power is turned on.
Power cord does not rewind. Power cord
Pull the power cord out a little and press
the cord rewind button.