Connections to other equipments, Before connecting – Sanyo DVD-L70 User Manual

Page 51

-E51-

* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are

* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Notes:
• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG

to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your
ears or causing the speakers to be damaged.

• When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

CONNECTIONS TO OTHER EQUIPMENTS

Before Connecting

• Please also read the user’s manual for any devices you wish to connect.
• When connecting, make sure to turn off the power to this unit and the device you are connecting, and unplug

the power plug from the AC outlet. Connecting while the power is on could cause damage to the speaker(s).

• Please make sure that the connecting plugs are securely inserted in each device. If not fully inserted, it may

cause noise.

Using an AV Amplifier with Built-in Digital Surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
When connecting to the following items, connections are made as in the following diagram. (This is one
example for connecting devices. Please refer to the amplifier’s user’s manual for details.)

• AV amplifier with built-in Dolby Digital decoder
• AV amplifier with built-in DTS decoder

Optical digital cable (not supplied)

To Optical Digital Audio Input

AV Amplifier with built-in digital
surround decoder as listed above

Front Speaker
(Right)

Surround Speaker
(Right)

Subwoofer

Center
Speaker

Front Speaker
(Left)

Surround
Speaker
(Left)

Optical Digital
Audio Output

Main Unit (Side)

5D90401A P50-Back

26/06/2003, 16:55