Start-up guide, Notice for digital tv function, Notice for customers in the united kingdom – Sony BRAVIA KDL-20G2000 User Manual
Page 2: Introduction notice for digital tv function

2
GB
NOTICE FOR 
CUSTOMERS IN THE 
UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this 
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a 5 
AMP FUSE approved by ASTA or BSI to BS 1362 (i.e., 
marked with 
or ) must be used.
When an alternative type of plug is used it should be fitted 
with a 5 AMP FUSE, otherwise the circuit should be 
protected by a 5 AMP FUSE at the distribution board.
If the plug supplied with this equipment has a detachable fuse 
cover, be sure to attach the fuse cover after you change the 
fuse. Never use the plug without the fuse cover. If you should 
lose the fuse cover, please contact your nearest Sony service 
station.
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and 
replace the fuse.
Thank you for choosing this Sony product.
Before operating the TV, please read this manual 
thoroughly and retain it for future reference.
• Any functions related to Digital TV (
) will only
work in countries or areas where DVB-T (MPEG2) digital 
terrestrial signals are broadcasted. Please confirm with 
your local dealer if you can receive a DVB-T signal where 
you live.
• Although this TV set follows DVB-T specifications,
compatibility with future DVB-T digital terrestrial 
broadcasts cannot be guaranteed.
• Some Digital TV functions may not be available in some
countries.
Trademark information
•
is a registered trademark of the DVB Project
• Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under one or more of the 
following US patents: 5510752, 5736897. BBE and BBE 
symbol are registered trademarks of BBE Sound, Inc.
• The illustrations used in this manual are of the
KDL-15/20G2000 unless otherwise state.
FUSE
Introduction
Notice for Digital TV function
