Stanton DJLab.3 - Manual (Page 7)

CONNECTIONS
1) Connect the power cord to an AC outlet.
2) Connect the RCA cable to the PHONO input of your mixer. You can also use a line input by setting the
phono/line switch at the rear of the turntable to Line.
Note: This turntable has separate analog and digital circuits. If you are looking for a purely analog signal, use the
Phono output. For access to the Key Lock feature use the Line output or S/P DIF output.
T.80 TURNTABLE CONTENTS
5
2
4
3
1
18
7
15
13
12
10
11
16 17
6
19 22 20
8
9
14
21