Sirius Satellite Radio EQ-SIRRCV - Manual (Page 10)

Activating the Song (S-Seek) Alert
1. Press and hold the MEMO button for 3 seconds to enter the S-Seek Mode.
2. Press and release SELECT. A pop-up screen displaying two selectable options - “Delete” and “S-Seek” will appear (below left).
3. Use the Channel Switch to highlight the “S-Seek” option.
4. Press and release SELECT and an S-Seek confirmation screen will appear. Select the “Yes” option using the Channel Switch and press
SELECT to confirm (below right).
With the S-Seek option enabled, whenever the receiver is turned on, it automatically searches the incoming channels to determine if a
match exists with the program information stored in receiver’s memory. If one or more matches are found, a pop-up screen momentarily
appears for 2- seconds and displays “S-Seek Alert”. An audible beep tone will be heard indicating that a match has been found. The display
then reverts to the S-Seek Alert screen which displays the current matches. You can now select the Artist/Song Title or game that you wish
to listen to. No stored match alert is provided for the currently selected channel. To ensure that no duplicate entries are stored in memory,
the receiver will check the stored input data to ensure the information about to be stored is not already in memory.
• If one or more matches are found, a list appears. You can scroll through the list and select a program using the Channel Switch. Your
selection will be tuned and the display will revert to the last active display mode.
• If a selection is not chosen within 10 seconds, the screen will revert to the last active display and tuning modes.
NOTE: Play of the current selection will continue until a new selection is made.
Menu Display Options
To enter the Menu Options page, press and release the MENU Button. The “Menu Options” list will appear on the display (below).
Using the Channel Switch, highlight the option you wish to adjust and press SELECT. The following options are available:
Sirius ID
Signal Indicator
FM Transmitter
Confirm Tone
Brightness Control
Channel Block
Contrast Control
Time Based Features
Auto Select
Factory Default
Note: If a button is not pressed within 10 seconds, the Receiver will exit the “Menu Options” function and revert back to the Default screen
display.
Sirius ID
Displays your 12 digit Sirius ID (SID) number. The SID is unique to every Streamer GT Receiver and is required to activate your service. It is
recommended that you write this number in the space provided on the last page of this user guide. No adjustments are allowed in this
mode. To exit this option, press the SELECT or Menu Button.