G setting the date format h setting the clock set, P40), System settings – Sanyo DSR-2108 User Manual
Page 47
SYSTEM settings
40
Refer to "Setting the clock (CLOCK SET)". (P9)
Refer to "Setting the clock (CLOCK SET)". (P9)
To be set when devices, such as a system controller or a
SANYO protocol camera, are connected to the RS-485
control terminal.
1
Select "RS485 SET" using the control button ({|)
and press the ENTER button.
The "RS485 SET" screen is displayed.
2
Select the item to be set using the control button
({|) and select a setting value using the control
button (}~).
DATA SPEED: 2400/4800/9600/19200
ADDRESS: 0 - 128
Refer to "Operating the PTZ dome camera". (P14)
Refer to "Setting the language (LANGUAGE)". (P11)
G
Setting the DATE FORMAT
H
Setting the CLOCK SET
I
Setting the RS485 SET
J
Setting the PTZ CONTROL
K
Setting the LANGUAGE
RS485 SET
DATA SPEED
9600
ADDRESS
1
L8HBT_WA(DSR-2116_2108)(GB).book 40 ページ ２００９年５月２７日 水曜日 午後４時５０分