Sharp CP-G10000S - Manual (Page 17)

17
CD-G10000
CP-G10000S
Pre
paration
for Use
Subwoofer control
„ Power switch
The POWER indicator lights up when you press the POWER switch
to
ON.
„ Volume control
Turn the VOL. control clockwise to increase the volume, and turn it
counterclockwise to decrease the volume.
„ Crossover frequency control
Adjust the high frequency cut-off point. Frequencies higher than the
set frequency are removed.
To emphasize the bass, turn this control toward 35 Hz and increase
the volume.
Note:
Observe the following to avoid malfunction and sound distortion.
Do not set the volume too high on the main unit. The subwoofer may
be damaged.
Power indicator
Before you turn the system on/off on the main unit, minimize the
speaker volume on the main unit and turn the VOL. control of the
subwoofer to " ".