Sharp AR-FX9 - Manual (Page 86)

82
SPECIAL FUNCTIONS
To store junk fax numbers, use the following procedure:
1 Press the [MENU] key.
2 Press the [ ] key ( ) or [ ] key ( )
until "5:ANTI JUNK FAX" appears, and
then press the [ENTER] key.
3 Press the [ ] key ( ) or [ ] key ( )
to select "2:JUNK FAX #" and press
the [ENTER] key.
4 Press the [ ] key ( ) or [ ] key ( )
to select "1:SET" and press the
[ENTER] key.
5 Enter a two-digit number from 01 to 10
that will identify the anti junk number
and press the [ENTER] key.
6 Enter the fax number with the numeric
keys and press the [ENTER] key.
7 Press the [MENU] key.
If you wish to store
another fax number,
return to step 5.
Press the [MENU] key to
exit.
"5:ANTI JUNK FAX"
Selection
"2:JUNK FAX #"
Selection
"1:SET"
Selection
If you enter a two-digit number that already
has a fax number stored, "#xx
STORED:CHANGE?" will appear. To
change the fax number that has been stored
under that 2-digit number, press the [
]
key ( ) or [ ] key ( ) to select "YES",
press the [ENTER] key, and enter the new
fax number.
Note