Sony HT-CT350 - Manual (Page 33)

33 US
T
uner F
unct
ions
You can enter the frequency of a station directly
using the number buttons.
1
Press TUNER repeatedly until “TUNER
FM” or “TUNER AM” appears in the
front panel display.
2
Press D.TUNING.
3
While pressing and holding SHIFT (1),
press the number buttons (2) to enter
the frequency.
Example: 88.00 MHz
While pressing and holding SHIFT, select 8
t 8 t 0 t 0.
4
While pressing and holding SHIFT,
press ENTER.
• If you have tuned in an AM station, adjust the
direction of the AM loop antenna (aerial) for optimum
reception.
If you cannot tune in a station
Make sure you have entered the right frequency.
If not, repeat steps 2 to 4. If you still cannot tune
in a station, it is likely that the frequency is not
used in your area.
Tuner Functions
Direct tuning
Number
buttons
TUNER
ENTER
D.TUNING
SHIFT
Tip