Siemens LC479050UC - Manual (Page 6)

English 4
Install two screws in top hood screw holes. Leave a 1/4” of each screw exposed.
5) Attach Chimney Mounting
Bracket
Attach spacers to holes on chimney mounting bracket arms, as seen in figure 2.
Attach chimney mounting bracket to wall through chimney screw holes created in
previous step. Use two screws.
Figure 3: Attach Chimney Mounting Bracket
6) Hang the Hood Place the hood by sliding the mounting holes in the top of the hood over the
exposed screws.
Figure 4: Hang the Hood
Check and adjust hood for level.
1/4"