Smeg American Style Fridge Freezer FA550X - Manual (Page 5)

32
INSTALLATION
• Make sure that your refrigerator is not near a heat source.
• Install it in a dry and well ventilated room.
• To ensure proper ventilation leave a 1 cm space on both sides and above the refrigerator.
• Clean the inside of the refrigerator before using it.
• Let the refrigerator stand (don’t move it) for at least one hour before connecting it to the power
supply.
• The appliance should be connected to a water supply that delivers drinkable or chemically
purified water.
• Install and level the refrigerator on a floor strong enough to take its weight and in an area
suitable for its size and use.
• Do not use the refrigerator in an area where the room temperature may fall below 13°C.
• Be careful not to damage the floors when you move the appliance (e.g. parquet flooring).
61502000GB.fm Page 32 Friday, April 22, 2005 5:00 PM