Sanyo DSR-3009 - Manual (Page 26)

English
25
Viewing Images
■ ■ ■ ■ Specifying the Number of Display
Screens (1 1 1 1)
If more than one camera is connected to the digital video recorder, multiple
camera images can be displayed on the screen in a multi-screen format. To
do this, you need to specify the channel numbers for the monitoring
cameras that are to be displayed on the monitor screen.
m Viewing images in a single-screen display
Click the [CHANNEL SELECT] button on the operating panel and select a single
channel for viewing. Images from the selected channel will appear on the screen as a
single-screen display.
The channel number selected will appear in the [CHANNEL] box.
• DSR-3009 model: 9 channels
• DSR-3016 model: 16 channels
m Viewing images in a 9-screen or 16-screen multi-screen display
Click the button on the operating panel. All camera images from the cameras that
are being monitored or that have been registered will appear on the screen in a 16-
screen or 9-screen multi-screen display. In the case of 16-channel screens, the display
will alternate between a 9-screen display and a 16-screen display each time you click
the
button.
• DSR-3009 model: 9-screen display
• DSR-3016 model: 16-screen display
m Viewing images in a 4-screen multi-screen display
Click the button on the operating panel. The camera images from the cameras
that are being monitored or that have been registered will appear on the screen in a 4-
screen multi-screen display. Each time you click the
button, the 4-screen multi-
screen changes to show channel numbers 1-4, 5-8, 9-12 and 13-16 respectively.
m Changing the on-screen display position
Click the button on the operating panel to change the display position on the
monitor for information such as the date and time.
■ ■ ■ ■ Playback Mode Operations (2 2 2 2)
m For playback
Click the H button on the operating panel.
m To adjust the playback speed
The playback speed can be increased or decreased in steps by pressing the E or
D buttons on the operating panel during playback.
m For reverse playback
Click the F button on the operating panel.
This operation is possible even when the images are paused.
m To adjust the reverse playback speed
The reverse playback speed can be increased or decreased in steps by pressing the
E or D buttons on the operating panel during reverse playback.
m To still playback
Click the J button on the operating panel during playback to pause playback.
Click the J button again while playback is paused to return to normal playback
mode.
m For frame feed (forward/reverse)
Stilled playback images can be advanced (or reversed) one frame at a time by clicking
the
K button (or the I button) on the operating panel while playback is paused.
m For alarm skip
Skip to the next (or previous) alarm event by pressing the B button (or the C
button) on the operating panel during playback.
Top-right Bottom-right Not displayed
The display example is that for
the DSR-3016 model.
2
1
L8HBA_US(DSR-3016 NETWORK)(GB only).book 25 ページ ２００３年３月２８日 金曜日 午後６時４４分