Getting started – Shark S3501CO User Manual
Page 5
2
TOLL FREE:
1-800-798-7398
3
www.sharkcompany.com
English
Getting Started
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark
®
Steam Mop.
IMPORTANT: First things first, always
make sure the mop is
UNPLUGGED
from the wall when not in use. Never
fill the mop, attach the mop head,
change or remove the micro-fiber
pocket when the mop is plugged into
the wall.
If you have hard water you
might want to use distilled water to
prolong the life of the Shark
®
Steam
Mop. Make sure you only add water
to the tank. Chemicals or cleaning
solution may damage the appliance
and could be unsafe for you and
your family.
2
ASSEMBLE
1
Insert the mop handle into the pump
actuator (the tube that leads to the
tank). Push the mop handle and
pump actuator together in until you
hear it click into place.
2
Select a mop head and cleaning pad.
Choose from the Rectangle, Triangle
or XL Rectangle mop head. Fit one
side of the pocket onto the head
first, then using the lavender loop,
pull the pocket over the head. Attach
the quick fasteners on the top of the
pocket to secure in place.
1
i
Quick Release Swivel Cord Wrap
j
Mop Handle
k
Cord Clips
l
Telescopic Handle Latch
m
Water Tank Viewing Window
n
Power-On Blue Light
(Lights up when plugged-in)
o
Water Tank Cap
p
XL Rectangle Mop Head
a
XL Rectangle Cleaning Pad
b
Rectangle Cleaning Pad
c
Triangle Cleaning Pad
d
Steam Duster Cleaning Pad
e
Carpet Glider
f
Filling Flask
g
Triangle Mop Head
h
Rectangle Mop Head
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1550 Watts
Water Capacity: 450 ml (15 oz.)
i
k
j
n
m
l
o
p
d
c
b
e
g
f
a
h