Speciþ cations, Appendix, Power output – Sunfire 913-047-00 User Manual
Page 14: Power at clipping, minimum, Hum and noise, Maximum output current, Maximum output voltage, Input impedance, rca inputs, Input sensitivity for rated out put, Input impedance,xlr input
User's Manual
14
APPENDIX
SpeciÞ cations
© 2002 SunÞ re Corporation.
All rights reserved. SunÞ re Corpora-
tion re serves the right to improve
its products at any time. Therefore,
speciÞ cations are subject to change
without notice.
Manual part number:
913-047-00 Rev A
Power output
250 watts con tin u ous, per channel,
all channels driven into eight ohms,
from 20 Hz to 20 kHz with no more
than 0.5% T.H.D.
Power at clipping,
minimum:
500 watts per chan nel into four
ohms.
Hum and Noise
-115 dB, A-Weighted
Maximum output current
80 amperes peak to peak per
channel
Maximum output voltage
45 Vrms
Input impedance, RCA
inputs
24 k
Ω
Input sensitivity for rated
out put
Unbalanced: 1.6 Vrms
Balanced: 0.8 Vrms
Input impedance,XLR input
24 k
Ω, each leg balanced to
ground Female XLR
Pin 1 ground
Pin 2 positive (hot)
Pin 3 negative (cold)
12 VDC Trigger Inputs
Input voltage range
5 VDC-18 VDC
Input im ped ance
Approximately 600
Ω
(20 mA at 12 V)
Removable terminal block
Dual 1/8” minijacks for daisy-
chaining
Power Consumption
45 W at idle
200 W typical (1/8th power)
1800 W absolute maximum
(fuse limit)
Dimensions
17.0 inches wide
5.75 inch es high (with feet)
16.5 inches deep (to tips of
connectors)
Weight
30 lbs
Finish
Brushed aluminum and black
anodize