Sharp MX-C400P - Manual (Page 16)

14
SPECIFICATIONS
Machine specifications (Continued)
* Type A connectors are located on the front and back right of the machine (two
connectors); however, the connectors cannot be used simultaneously. The connector
on the back of the machine is not initially available for use. If you wish to use the
connector, contact your service assistance.
Duplex module
Paper sizes: 8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
5-1/2" x 8-1/2", A4, B5, A5, 16K
Paper weight: Plain paper (16 lbs. to 28 lbs. (60 g/m 2 to
105 g/m 2 ))
Paper types:SHARP-recommended plain paper,
recycled paper, and colored paper
Output tray (Center tray)
Output method: Face-down output
Output capacity: 250 sheets (using SHARP-recommended
8-1/2" x 11" or A4 paper)
(The maximum number of sheets that can be held varies
depending on ambient conditions in the installation
location, the type of paper, and the storage conditions of
the paper.)
Tray full sensor: Yes
Interface port
LAN connectivity: 10Base-T / 100Base-TX /
1000Base-T
USB connectivity: Type A connector supports USB 2.0
(Hi speed)*
Compatibility requirements of USB 2.0
Memory Capacity: Max. 32 GB
Disk Format:
FAT32 only
Type B connector supports USB 2.0
(Hi speed)
mxc400p_us_saf.book 14 ページ ２００９年１０月５日 月曜日 午後１時５３分