beautypg.com

Routine maintenance, Removing the dust bag, Installing new dust bag – Sanitaire SC5700 Series User Manual

Page 8: Reinstalling the dust bag cover

background image

ROUTINE MAINTENANCE

The instructions in this booklet serve as a guide to routine

maintenance. To avoid unnecessary service calls, check the

filters, belt, and brush roll often.

NOTE: When vacuuming carpet fresheners or

cleaners, powder, plaster dust, or similar fine

substances, the filters will require more frequent

maintenance.

NOTE: Turn off the switch and unplug the electrical

cord before changing the filter. Never operate

the vacuum cleaner without the filter assembly

in place.

Removing the Dust Bag:

Style LS, PN 61820

1

Latch

Remove dust bag cover by lifting up on latch

and pivoting dust bag cover out and away from

cleaner.

2 Grasp dust bag flaps and pull out from

cleaner.

Flaps

Installing New Dust Bag:

BEND FLAPS FORWARD

PLACE BAG FLANGE

ON TOP OF SHELF

PUSH BAG INTO HOUSING

POSITION BAG BOTTOM

BEHIND RIBS

Place the bottom of the dust bag cover on cleaner lining up

grooves on outer edge of cover with rails on side of cleaner.

Rotate cover up, pressing against cleaner until it locks into

place.

Reinstalling the Dust Bag Cover:

Rails on

Cleaner

Grooves on

inside edge

of bag cover

8