Speco Technologies SP-5IO2 - Manual

SP-5IO2
Owners’ Manual for Model:
200 New Highway Amityville, New York 11701 • 631-957-8700 www.specotech.com
Wall Mounting:
Due to weight of speakers all mounted installations MUST be supported
by wood beams/studs. Utilize long screws. Screws need to be tightly
secured through the base of the speaker into a wood mount that can
support the weight of the speaker.
SPECO TECHNOLOGIES WILL
ASSUME NO LIABILITY FOR SPEAKERS THAT WERE NOT
INSTALLED PROPERLY.
For best secure installations, separate the speakers from their ball mount
connections and securely fasten the base by itself to the mounting surface.
Upon this conclusion, reattach the speaker (with properly pre-attached
speaker wires to terminals) to its ball socket connection, position the
speaker to its optimum desired angle placement for sound enjoyment and
tighten the three screws around the ball connection with Allen wrench
until secure.
WARNING: ALWAYS LOOSEN SCREWS PRIOR TO
REPOSITIONING SPEAKER TO DESIRED ANGLE THEN
TIGHTEN UPON FINAL SELECTED ANGLE. Forced positioning
of the speaker angle when the ball connection screws are tightened could
lead to a loose ball connection of the speakers. This type of mishandling
is not covered in the warranty.
Warranty:
Speco Technologies offers a limited 2-year warranty on their outdoor
speakers. Please reference the enclosed warranty card for complete details
of warranty.
In-Wall or On Wall,
Indoor or Outdoor
The SP-5IO2
easily converts
from an on-wall
to an in-wall speaker
via built-in mounting tabs.
®
®
SP-IO2ownermanual 2/17/06 4:30 PM Page 1