Stearns YUKATAT B523 User Manual
Page 12
5.2 KNOWING YOUR VALVES
Yukatat
™
kayak uses three types of valves. Type I (Type II, is a smaller
version) to inflate floor and main chambers. Type IV is used to fill small
chambers such as spray rings and spray deck lifters.
5.3 MAKE SURE:
1. Air chamber valves are centered with the inflation valve cover
2. Upper and lower weld seams of the air chambers are running parallel
with the cover and centered all around
If the air chambers are not aligned or centered:
A. Relieve air pressure
B. Unzip the cover
C. Partially inflate
D. Realign air chambers, zip cover and inflate chambers
3. All valves are closed tightly
4. Bow and stern frame assembly are aligned
10
..
To inflate
To deflate
Type I (II)
Cap
Valve
Welded
Reciprocal
.
Twist to inflate/deflate
Type IV