Soleus Air FT1-30-44 - Manual (Page 5)

Assembly Instructions
Estimated assembly time: Approximately 5 minutes
Tools required: Phillips screwdriver (not included)
1) Remove the fan and packaging materials
from the box.
2)
Remove the mounting nut from the motor
shaft.
3) Position the back grille over the motor shaft,
aligning the holes in the back grille with the
two knobs that protrude from the motor.
Make sure the handle is at the top.
4)
Secure the back grille by screwing on the
mounting nut. Turn clockwise and tighten
firmly.
5) Slide the fan blade onto the mounting shaft
with the shaft sleeve facing the motor. Align
securing screw with flat groove in the motor
shaft and tighten with Phillips screwdriver.
6)
Position front grille so logo is horizontal.
Secure the top tab to the back grille. Snap
the four remaining metal clips to complete
the assembly.
5