Sharp PN-S655 User Manual

Page 11

You can return the settings to their factory-preset values and

restrict operations.

1. After pressing

SIZE

for about 5 seconds, press

, and

in that order.

OFF

UNLOCKED

ON
ON

LED
OFF

FUNCTION

1/1

ALL RESET

ADJUSTMENT LOCK
RS-232C/LAN
OSD DISPLAY
LED
TEMPERATURE ALERT
STATUS ALERT

END…[MENU]

2. Select and set the items.

ALL RESET
Resets the settings to the factory default settings.
Press

, select the resetting method, and then press

After initialization, turn the main power switch off and

then back on.

ALL RESET1 ....Resets all the settings to the factory

default settings.

ALL RESET2 ....Returns all settings to the factory default

settings except for the following items:

LAN SETUP, RS-232C/LAN SELECT,

NETWORK, MAIL, and SERVICE &

SUPPORT (See page 7, and pages 25

to 28.)

ADJUSTMENT LOCK
You can disable operations on the monitor and the

remote control unit that use buttons.

OFF ...Enables operation.

1.........Disables all operations other than turning power

on/off and FUNCTION.

2.........Only the FUNCTION operation is enabled.

Disables all operations other than FUNCTION (not

even power on/off).

RS-232C/LAN
Specifies whether to allow control via RS-232C or LAN

(see pages 12 and 21).
OSD DISPLAY
Hides/shows menus.

The FUNCTION screen cannot be hidden.
LED
Specifies whether to light power LEDs.

Initialization (Reset)/Functional Restriction Setting

TEMPERATURE ALERT
Selects the notification method for an abnormal

temperature.

OFF .............. Do not notify about an abnormal

temperature.

OSD & LED .. When an abnormal temperature is

detected, the power LED flashes in red

and green alternately and the screen

displays a message: TEMPERATURE.

LED............... When an abnormal temperature is

detected, the power LED flashes in red

and green alternately.

STATUS ALERT
Selects the notification method for a hardware error.

OFF .............. Do not notify about the error.

OSD & LED .. When a hardware error is detected, the

power LED flashes in red and the screen

displays a message: STATUS [xxxx].

LED............... When a hardware error is detected, the

power LED flashes in red.

3. Press

to return to the normal screen.

TIPS

• When both abnormal temperature and hardware error are

detected, the hardware error notification overrides.