Sharp UX-K01 - Manual (Page 6)

5
Registering the Cordless Handset
PLEASE REGISTER
After the initial charging,
the cordless handset
display shows: To use the cordless
handset, you must
first register it using
the fax machine.
1
On the cordless handset, hold down
until the display at right appears.
2
Press on the cordless handset.
•
If FAX BUSY appears in the display,
wait until the fax machine is no longer in
use and then start from Step 1 again.
3
On the fax machine, hold down
until the display at right appears.
4
Press on the fax machine.
•
If HS FULL ENTRY appears in the display, the maximum number (3) of
additional cordless handsets have already been registered.
5
On the fax machine, enter a number
from 2 to 4. This number identifies the
cordless handset. This completes the
registration procedure.
•
If ALREADY STORED appears in the
display, the number you selected has
already been assigned to a cordless
handset. Try a different number.
INTER
COM
1
INTERCOM
1
MODE SELECT
1: HS ENTRY
2: HS DELETE
Cordless handset display:
Fax machine display:
MODE SELECT
HS ENTRY MODE
1: HS ENTRY
2: HS DELETE
PRESS HS NUMBER
HS2 ENTERED
Example: “2” is selected
HS2 ENTERED
Both displays return to the
normal standby display