Sony BRAVIA 4-418-730-11(1) - Manual (Page 8)

8
Attaching the Table-Top Stand
Refer to the supplied Table-Top Stand leaflet for proper attachment.
• Do not put stress on the LCD panel or the frame around the screen.
• Be careful to not pinch your hands or the AC power cord when you install the TV set to the Table-
Top Stand.
1 Place the TV set on the Table-Top Stand.
• Align the TV from the top, slide it in until the guide pins cannot be seen.
2 Fix the TV to the Table-Top Stand using the supplied screws. The arrow marks
indicate the location of the screw holes used for securing the Table-Top Stand.
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Guide pins