Sony WEGA KZ 42TS1 - Manual (Page 14)

14
(US)
Installing and Connecting the TV
Connecting a Digital TV Receiver
Notes
• You cannot record the signal from any equipment connected into the Y, P
B
and P
R
connectors.
• This TV is not compatible with digital TV receivers configured with RGB or VGA output
connectors.
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box’s Y, P
B
and P
R
jacks to the TV.
Notes
• The Y, P
B
and P
R
jacks do not provide audio, so audio cables must be connected to provide
sound.
• Component video (Y, P
B
, P
R
) connection is necessary to view 480i, 720p, and 1080i
formats. Note that this TV displays all format types of picture in a resolution of 852 dots ×
1024 lines (KZ-32TS1), or 1024
× 1024 (KZ-42TS1).
2
Using an AUDIO cable, connect the Digital TV Set-top box’s Audio
OUT jacks to the TV’s AUDIO IN jacks.
HD VD
IN
OUT
P B /B Y/G P R /R L R AUDIO
L R
VHF/UHF
AC IN
AUDIO OUT
COMPONENT VIDEO IN 2 / RGB IN
SUB
WOOFER
CONTROL
S
VIDEO L R AUDIO P B Y P R L R AUDIO S VIDEO
VIDEO IN 1 COMPONENT VIDEO IN 1
VIDEO IN 2
VMC-10HG (not supplied)
AUDIO-L (white)
AUDIO-R (red)
Digital TV Set-top box
RK-74A (not supplied)
Rear of TV
P
R
P
B
Y