Sony HDW-S280 User Manual
Page 75
75
Items in the Extended Setup Menu
C
h
a
p
te
r 9
S
e
tu
p M
e
nus
a) Not applicable in 24PsF/23.98PsF mode
When you set setup menu items 715 through 718, 721, and
740 through 747, set VID.PROC on the P1 PROCS page of
the function menu to MENU. Then the video output control
function on the front panel is disabled.
Items 800 to 899: Settings for audio control
740
MASTER LEVEL (HD)
Adjust the high-definition video signal output from the HD SDI OUTPUT connector.
This adjusts the Y, PB, and PR levels simultaneously.
0.0% (0H) to [100% (800H)] to 141.3% (B4EH)
741
Y LEVEL (HD)
Adjust the Y level of the high-definition video signal output from the HD SDI OUTPUT
connector.
0.0% (0H) to [100% (800H)] to 141.3% (B4EH)
742
PB LEVEL (HD)
Adjust the PB level of the high-definition video signal output from the HD SDI OUTPUT
connector.
0.0% (0H) to [100% (800H)] to 141.3% (B4EH)
743
PR LEVEL (HD)
Adjust the PR level of the high-definition video signal output from the HD SDI OUTPUT
connector.
0.0% (0H) to [100% (800H)] to 141.3% (B4EH)
745
SETUP (BLACK) LEVEL
(HD)
Adjust the setup level of the high-definition video signal output from the HD SDI
OUTPUT connector.
0 to [110H] to 220H
746
SYNC PHASE (HD)
Control the H sync phase of the high-definition video signal output from the HD SDI
OUTPUT connector according to the menu.
0 to [80H] to FFH
747
FINE (HD)
Fine control the H sync phase of the high-definition video signal output from the HD SDI
OUTPUT connector according to the menu.
[0] to 3FFH
Item
number
Item name
Settings
Note
Item
number
Item name
Settings
802
DIGITAL AUDIO MUTING
IN SHUTTLE MODE
Set the digital audio muting conditions during shuttle playback.
[OFF]: Not muted.
CUEUP: Muted during cue-up or preroll operations.
FULL: Muted in shuttle mode.
SLOW: Muted, with the speed less than
±
0.2 time normal playback.
807
AUDIO OUTPUT PHASE
Select the output timing of digital audio playback signals (HD SDI, and SDI only). The
reference position corresponds to a setting for 80H; when the setting is less than 80H,
the output timing is advanced, and when it is higher than 80H, the output timing is
delayed. (at 80H, 128 samples = approx. 2.7 ms, and 1 sample=approx. 20 µs)
0 to [80] to FF: Setting in this range
808
INTERNAL AUDIO SIGNAL
GENERATOR
Select the operation of the internal audio test signal generator.
OFF: No operation
SILNC: Silent signal
[1KHZ]: At 1 kHz,
−20 dB FS sine wave is supplied to all audio input channels.
810
AUDIO EDIT PREVIEW
SWITCHER
Set the output phase for the audio playback signal when ASSEMBLE is set to ON.
[INT]: The audio playback signal output phase is the same as the output phase in E-E
mode. Use this setting when editing with a single VTR, or when previewing while
watching the VTR output signal.
EXT: The audio playback signal output phase is the same as the phase of an input
video signal or external reference video signal.
812
AUDIO OUTPUT LEVEL
Set the audio output level.
[+4 dB] 0 dB –3 dB –20 dB
Note
−20 dB is not displayed in the display window.