Sony DHR-1000 - Manual (Page 91)

Editing 91
You can output a still picture to your computer using a capture board
(optional) and print out the picture using a video printer (optional).
Connecting the DVBK-1000 capture board
With this connection, you can output a still picture to your computer.
For further instructions, refer to the manual of the connected
equipment.
Connecting a video printer
With this connection, you can print out a still picture.
Note
• If your video printer does
not have an S-VIDEO input
jack, connect to the video
input jack on your video
printer with a video cable.
• If your video printer has a
LANC jack, connect the
LANC jacks on your VCR
and video printer with the
LANC cable and set LANC
MODE in the ADVANCED
OPTIONS menu on your
VCR to “S.” You can print
out with the PRINT button
on the remote commander
of this VCR.
• For further instructions,
refer to the manual of the
connected equipment.
Other editing features
Connecting a capture
board or video
printer
DVBK-1000 (for IBM compatible
computer)
This VCR
TV
DV connecting cable
ç: Signal flow
Video printer
This VCR
TV
S-video cable
ç: Signal flow
LANC cable