SIIG SATA II-150 - Manual (Page 11)

11
For An Existing Installation
1.
Setup the RAID array prior to driver installation and
boot up to Windows.
2. At the Found New Hardware window, click Locate
and install the driver software (recommended).
3. Click Continue. Insert the driver CD when prompted.
4. At The software for this device has been
successfully installed, click Close.
5. Restart Windows Vista to complete the installation.
When Windows resumes, go to Initio SATA RAID
Manager GUI on page 13 and install the RAID utility.
Windows Server 2008
For A New Installation
1.
Setup the RAID array prior to Windows installation.
2. Follow Microsoft Windows installation procedure.
3. At the Where do you want to install Windows
screen, insert the driver CD, click Load Driver, then
click Browse.
4. Double click your CD/DVD drive, select the Vista
folder, then click OK.
5. Select Initio INIC1622 S-ATA RAID Controller...,
then click Next.
6. Continue with Windows Server 2008 operating
system installation.
For An Existing Installation
1.
Setup the RAID array prior to driver installation and
boot up to Windows.
2. At the Found New Hardware window, click Locate
and install the driver software (recommended).
3. Click Don't search online. Insert driver CD.