Socket Mobile CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology - Manual (Page 24)

24 | CHAPTER 2: BASIC SETUP
METHOD 2: DIAL AUTOMATICALLY FROM THE APPLICATION
Note: After you have set up a dial-up connection, the Connection
Manager will automatically try to connect whenever you insert the card
and try to use Pocket Internet Explorer, Pocket Inbox, or any other
program that uses a dial-up connection.
a) Start the program that uses a dial-up connection. Enter a request
for receiving and/or transmitting information (e.g., in Pocket
Internet Explorer, enter a new URL and tap “Go”). The Pocket PC
will automatically try to connect.
Note: If the phone number of dialing location is wrong, tap Settings.
Tap Manage Connections and Edit the properties of your connection.
b) Depending on your phone and connection settings, you may need to
enter a passkey and/or a password before the phone will start to
dial:
• If you have a Nokia 3650/6310/7650/8910/8910i or Motorola
Timeport 270C, you must complete the bonding process:
a. The first time you try to connect, the phone will ask if you want
to bond. On Motorola, enter GRANT; on Nokia, enter ACCEPT.
b. Make up a 4-16 digit passkey, enter it on the phone, then
enter it on the Pocket PC.
c. After successfully bonding with your phone, you may want to
set up your phone for automatic connections. See Appendix C,
“Automatic Phone Connections,” for instructions.