Seiko Cal.7T62 - Manual (Page 6)

6
English
6
1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will
automatically reset the STOPWATCH hands to “0”.
2. If the alarm has been set and the crown is pulled out to the second click, the ALARM hands will turn
to indicate the current time.
3. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking
into consideration the time required to set the ALARM hands and to adjust the STOPWATCH hand
position if necessary.
4. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed
that the date changes once in 24 hours.
5. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn
it back to the exact minute.
2. ALARM HAND ADJUSTMENT
Hour hand Minute hand
B
ALARM
hour hand ALARM minute hand
B Press repeatedly to set ALARM
hands to the time indicated by the
main time hands.
✩ Set the ALARM hands to the time the main
time hands indicate.
* The ALARM hands move quickly if
button B is kept pressed.