Sharp AR-5316 User Manual

Page 19

Text mode
Original mode

BEFORE USING THE MACHINE

Press the [START] key (

) and then

the [PAPER SIZE ENTER] key.

To change the paper size
setting of another tray,
repeat steps 2 to 5 after
pressing the [START]
key (

Important points when using the printer mode

• Make sure that the tray's paper size setting is the

same as the tray's paper size setting in the printer
driver. For example, if the tray's paper size setting is
8-1/2" x 11R, set "Setting Paper Size" to "Letter-R".
For more information, see "CONFIGURING THE
PRINTER DRIVER" in the "Software Setup Guide".

Affix the paper size label for the paper size
selected in step 3 to the label position on the
right end of the tray.

START

Note

AR-5316-5320-EX.book 17 ページ２００５年４月８日　金曜日　午前９時３５分