Simaudio MOON CD-1 - Manual (Page 10)

MOON CD-1 CD Player
Remote Control Operation
The MOON CD-1 CD Player uses the ‘CRM’ full-function remote control (figure 3).
It operates on the Philips RC-5 communication protocol and is can be used with
other Simaudio MOON components.
The ‘CRM’ remote uses two AA batteries (included). To install them, simply slide
the back plate off in the direction of the arrow; insert the batteries in the correct
direction and then replace the back plate.
To engage the CRM remote for use with the MOON CD-1 CD Player, you must
first press the button labeled CD.
The POWER button located on the upper left will switch the CD Player to either
‘Stand by’ or ‘On’ mode.
Certain buttons found on this remote control perform identical functions to their
corresponding button located on the CD-1’s front panel. Please refer to page 7 for
a more detailed description:
0 thru 9 Direct access track number selection
OPEN/CLOSE Open/Close the Compact Disc drawer
DISPLAY Press Once: Changes the time display mode on front panel
Press and hold: Turns the front panel display on and off
(refer to page 11 for more details about the DISPLAY function)
„ Stop playing the CD’s current track
Pauses the player
X Play the compact disc loaded into the player
Press Once: Go back to the previous track on the disc
Press and hold: Scan backward through current track
Press Once: Skip to the next track on the disc
Press and hold: Scan forward through current track
Figure 3: CRM Remote Control
___________________________________________________________________________
Remote Control Operation 10