Soundstream Technologies Exact 6.2 - Manual (Page 8)

8
FIGURE 4
EXACT6.2 Wiring Diagram
Figure 4 shows a diagram illustrating the wiring of the EXACT6.2 Component Speaker
System. It is important to make sure that all connections are in phase; that is positive
(+) is connected to positive (+), and negative (-) is connected to negative (-), since an
out-of-phase connection will cause a dislocated image and low bass output. The
provided cable harness is color coordinated to aid proper connection of crossovers to
speakers; wire colors should match speaker terminal tab colors. For amplifier to
crossover connection, we suggest using a minimum of 16 gauge (ideally 12 gauge)
premium cable. The connectors provided with this system will accommodate wire from
12 gauge to 16 gauge.
WIRING
Head Unit
Amplifier
EXACT6.2
EXACT6.2X
Crossover
< Woofer Output
< Input
< Tweeter Output
EXACT6.2X
Crossover
EXACT6.2