Operator control and monitoring devices, Panels — 270 series – Siemens Operating Control and Monitoring Devices 270 User Manual

Page 11

Siemens ST 80 · 2006

2/120

Operator Control and Monitoring Devices

SIMATIC OP 270

Panels — 270 series

■

Function

(continued)

Configuration

Configuring is performed using the configuring software SI-
MATIC ProTool or SIMATIC ProTool/Pro Configuration (see HMI
software/configuring software or visualization software) or using
the engineering software SIMATIC WinCC flexible Standard or
Advanced (see HMI software/SIMATIC WinCC flexible engineer-
ing software).

Projects generated using ProTool can be imported into WinCC
flexible.

Applications/options

When configuring with ProTool

• SIMATIC ProAgent/MP;

fast, localized fault diagnosis in plants and machines for
SIMATIC S7 and SIMATIC HMI (see HMI software/process
diagnostics software SIMATIC ProAgent)

When configuring with WinCC flexible

• WinCC flexible /ProAgent;

fast, localized fault diagnosis in plants and machines for
SIMATIC S7 and SIMATIC HMI (see HMI software/process
diagnostics software SIMATIC ProAgent)

• WinCC flexible /Sm@rtAccess;

Remote control and monitoring as well as communication be-
tween different SIMATIC HMI systems (see WinCC flexible RT
options)

• WinCC flexible /Sm@rtService;

Remote monitoring and service of machines/plants over the
Internet/Intranet (see WinCC flexible RT options)

■

Integration

The SIMATIC OP 270 Operator Panels can be connected to:

• SIMATIC S7-200/-300/-400

• SIMATIC WinAC Software/Slot PLC

• SIMATIC S5

• SIMATIC 505

• SINUMERIK

• SIMOTION

• Non-Siemens PLCs

- Allen Bradley
- Mitsubishi
- Telemecanique

- LG GLOFA GM
- Modicon
- GE-Fanuc
- Omron

• Over Ethernet (TCP/IP) to higher-level PC and network printer

(optionally over NE2000-compatible network card)

Additionally when configuring with WinCC flexible

• Ethernet communication with SIMATIC S7

(optionally over NE2000-compatible network card)

• Multi-protocol capability

• HTTP communication to other SIMATIC HMI systems

(optionally with the "WinCC flexible /Sm@rtAccess" option)

• SINUMERIK

(optionally with "SINUMERIK HMI copy license
WinCC flexible CE"; the "SINUMERIK HMI engineering pack-
age WinCC flexible" is additionally necessary for configuration;
for further information, see Catalog NC 60)

1) Cannot be connected in conjunction with WinCC flexible

Note:
For further information, see "System interfaces".