Sherwood RX-4109 - Manual (Page 13)

LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the mode
changes as follows:
Tuning mode : “PRESET” goes off.
Preset mode : “PRESET” lights up.
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and “TUNED”.
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• Each time this button is pressed, the band is
changed to FM or AM.
12
“BAL” and the balance level is displayed for 3
seconds.
If the balance display disappears, start from the
step 11 again.
Note:
In general, the balance level is set to 0.
Adjusting the sound volume balance
11
.
Enter the balance mode.
12
.
Adjust the sound volume balance between the left and right speakers.
1
.
Select the tuner and then the desired band.
2
.
Select the tuning mode.
3
.
Press the TUNING/PRESET UP ( or DOWN ( ) button for more than 0.5 second.