Snapper SLB55150BV - Manual (Page 11)

SNAPPER MODEL SLB55150BV
R0703.1
Ref No Part No Description Qty
1 3010003 Housing, blower & engine base 1
--- 3079090 Decal, Danger – Hands & Feet (applied to blower housing) 1
--- 3079091 Decal, Caution – Rotating Parts (applied to blower housing) 1
--- 3079088 Decal, Danger – Flying Material (apllied to blower housing) 1
--- 3079092 Decal, Ear, Eye, Breathing Protection (applied to blower housing) 1
--- 3039077 Engine - 5.5HP Briggs & Stratton Intek 1
--- 3079205 Decal, Throttle Control (Turtle/Rabbit – applied to engine throttle) 1
--- 3031006 Bolt, hex head - 5/16-18 x 1-1/2 (engine mounting bolt) 4
--- 3031986 Nut, hex, small serrated flange - 5/16-18 4
2 3021506 Impeller 1
3 3031971 Bolt, impeller - 3/8-24 x 2” 1
--- 3031008 Washer, split lock – 3/8” 1
--- 3031716 Washer, flat, heavy duty – 7/16” 1
--- 3031795 Key, impeller shaft – 1/4” x 2-1/8” 1
4 3020234 Baffle, intake 1
--- 3079263 Decal, ‘Snapper’ Logo (applied to intake baffle) 1
5 3031016 Bolt, hex head - 5/16-18 x 5/8” 4
6 3031003 Washer, split lock - 5/16 4
7 3024507 Deflector, side discharge 1
8 3031016 Bolt, hex head - 5/16-18 x 5/8” 2
9 3031003 Washer, split lock - 5/16 2
10 3024508 Door assy, front/side discharge 1
11 3031015 Bolt, hex head – 1/4-20 x 1/2” 1
12 3031013 Washer, lock - 1/4 1
13 3031014 Bushing, sleeve – ¼”id x 3/8”od x ¼” length 1
14 3024502 Spring, discharge door 1
15 3031103 Knob, ball - 3/8-16 tap 1
16 3033001 Wheel assy - 410-350 x 4 2
--- 3033107 Bearing - replacement for pneumatic tire assembly 4
17 3031001 Washer, flat - 5/8” 2
18 3031000 Ring, snap – 5/8” 2
19 3033017 Wheel, caster - 6 x 1.50 semi-pneumatic 1
20 3033101 Bracket, caster - right side 1
21 3033102 Bracket, caster - left side 1
22 3031649 Bolt, hex head - 3/8-16 x 2-1/4” 1
23 3031355 Nut, reverse lock - 3/8-16 1
--- 3033003 Assembly, front caster – complete (consists of ref #’s 19-23) 1
24 3031016 Bolt, hex head - 5/16-18 x 5/8” 2
25 3031003 Washer, split lock - 5/16 2
26 3023000 Handle, upper 1
27 3031590 Grip, handle – 1”id x 24” foam 1
--- 3023270 Assembly, upper handle complete w/grip (consists of ref #’s 26-27) 1
28 3023002 Handle, lower 2
29 3031006 Bolt, hex head - 5/16-18 x 1-1/2” 6
30 3031986 Nut, hex, small serrated flange – 5/16-18 6
Optional Equipment
3035011 Control, throttle 1
3031945 Screw, combo head machine - #10-24 x 1-1/4 (Secures throttle to upper handle) 2
3031981 Washer, split lock - #10 2
3031947 Nut, hex machine - #10-24 2
3031007 Clip, throttle cable (secure cable along left side of handle assembly) 2
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE