Siemens AX75 - Manual (Page 8)

right page (7) of AX75_Pegasus, short, 140mm, en, A31008-H2850-A1-1-7619 (18.04.2005, 10:38)
© Sieme
ns
A
G
200
4,
C:
\S
iemen
s\
D
TP-S
atz\
Pro
dukte
\A
X75_
Pega
su
s_
1\
out
-
7 Security
VA
R
Langu
age:
en;
VAR issue da
te:
050
307
Menu control
The steps needed to reach a function are
shown in a condensed form in this user
guide.
E.g. to display call list for missed calls:
Press
§Menu§
¢ Z ¢
Calls missed
¢
§Select§ .
This comprises the following steps:
Open main menu, select
Z
, then select
the function Calls missed . You have to
confirm with §Select§ .
Standby mode
Very often function descriptions begin in
standby mode.
The phone is in standby mode and is ready
for use when the name of the service pro-
vider appears on the display.
Press and hold the On/Off/End key
B
to return to standby mode from any
situation.
Security
§Menu§
¢ m ¢
Security
¢
Select function.
The phone and SIM card are protected
against misuse by several security codes.
Keep these confidential numbers in a safe
place where you can access them again if
required.
Codes
PIN control
You can stop the PIN prompt being
activated when the phone is switched on,
but you then risk unauthorised use of the
phone.
Press
§Change§ . Enter PIN and confirm
with §OK§ .
Change PIN
You can change the PIN to any 4- to 8-dig-
it number you find easier to remember.
Enter current PIN and confirm with §OK§ .
Enter new PIN twice and confirm each
time with §OK§ .
Change PIN2
(Display only if PIN2 is available). Proceed
as with Change PIN .
Change phonecode
You define the phone code (4-8 digits)
when you call up a protected function for
the first time. It is then valid for all phone-
code protected functions.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN), provided by your serv-
ice provider with the SIM card, according
to instructions. If the PUK (MASTER PIN)
has been lost, please contact your service
provider.
Preventing accidental activation
Even if PIN control is deactivated confir-
mation is required to switch on the
phone.
This prevents the phone from being
switched on accidentally, e. g. when car-
ried in a pocket or whilst you are on an
aircraft.
Press and hold the On/Off/End key
B
and confirm with §OK§ . The phone switch-
es on.
Calling
Dialling with number keys
The phone must be switched on (standby
mode). Dial number (always with area
code, if necessary with international dial-
ling code). To dial international dialling
code press and hold
0
until a "+" is dis-
played. Press §Country§ and select country.
Short press §Clear§ to clear the last digit, a
long press clears the entire phone
number. To dial press the Call key
A
.