Sunbeam JE7600 - Manual (Page 9)

7
Assembling your Sunbeam
Cafe Juice
™
Before Use
After unpacking your Sunbeam Cafe Juice™,
we recommend that you dissemble the unit
before using for the first time. Wash all parts
except the motor base in hot soapy water.
Rinse and dry immediately.
Important: Always ensure your juicer is
unplugged from the power outlet when not
in use, during assembling or whilst removing
parts.
1. Set the motor base on a dry, level surface.
For convenience when juicing, have the
control switch facing you – figure 1.
2. Place the juice collector / bowl onto the
top of the motor base – figure 2.
3. Position the stainless steel blade and
filtering basket onto the motor drive shaft
and push down until firmly in
place, the arrows indicate the correct
alignment position of the basket – figure 3.
4. Place the juicer cover onto the juice
collector / bowl, with the feed chute
positioned over the stainless steel blade
and filtering basket and push into position
– figure 4.
Figure 3
Figure 4
Figure 1
Figure 2