Sony READER DAILY EDITION PRS-950 - Manual (Page 132)

Changing Settings
132
Table of Contents Index
To configure a new access point using the WPS (Wi-Fi
protected Setup) feature
The setting of the wireless LAN router supported WPS
feature is easy to configure.
Tap [Create New Connection]  tap the desired setting
method.
There are 2 ways to configure the access point. Follow
the on-screen setup instructions.
 [WPS Push-Button Configuration]: Connects the
WPS-compliant access point by using the push-
button method.
 [WPS PIN Method]: Connects to the WPS-compliant
access point using the PIN method.
Note
If you begin a new configuration using the Push-Button or
PIN method during connection to a Wi-Fi network, the
connection will be terminated.
To register a new access point manually
An access point not displayed in the access points list
(such as the access point with stealth function) can be
configured.
Tap [Create New Connection]  [Manual Registration]
 enter the SSID of the access point  configure other
necessary settings  tap to complete.
About other detailed settings of the access point, see
 133 .