Sharp AL-1456 - Manual (Page 15)

13
2
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when
the time set with the "Auto clear time" setting (p.54) elapses after a copy or scanner
job is finished, or when the clear (
) key is pressed twice.
The initial settings of the operation panel are shown below.
When copying is begun in this state, the settings in the following table are used.
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power
shut-off mode (p.54) in order to minimize power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
Copy quantity 1 copy
Exposure adjustment Auto
Zoom 100%
AL-1555 only
Original to copy The "Original to copy" indicator does
not illuminate. (One-sided copying
only)
Tray Paper tray 1
AL-1555
A5 A4
A4 B5
A4 A5
141
86
70
"0" is displayed in the display.