Swisher Truck Spreader 11730 - Manual (Page 5)

Item # Part # Description
3 NB556 Washer - USS Flat, 5/16 ZY
10 NB181 Nut - Nyloc 5/16-18 ZY
21 10976TK Support - Weldment, LH; Truck Spreader
22 10979TK Support - Weldment RH; Truck Spreader
24 NB501 Bolt - 5/16-18 X 1 HCC GR5 ZY
25 NB579 Washer - Fender, 5/16 X 1 1/4 OD ZY GR2
Step 5:
Attach the Support Tube Weldments
(21 & 22) to the tank by inserting the
bolts (24) through the Washers (25) and
the Weldments (21 & 22), and into the
holes on the side of the tank as shown.
Place a washer (3) over each bolt (24) on
the inside of the tank and thread the nuts
(10) onto the bolts (24) and tighten securely.