Star Trac Spinner - Manual (Page 6)

Page 6 STAR TRAC GROUP CYCLES OWNER’S GUIDE
5. Install the Handlebar
Insert the handlebar post into the
frame assembly and secure in place
using a tension handle.
Position the handlebar on top of the
handlebar post and secure in place
using a tension handle and washer.
NOTE: Tighten the tension handles
firmly.
Step 5
6. Install the Water Bottle
Holders
Using the Allen Wrench, remove the
two screws from the right side fork of
the frame assembly. Position a water
bottle holder in place against the
frame assembly, and re-install the two
screws to secure.
Repeat to install the left-side water
bottle holder.
Step 6
You have now completed the assembly
of your STAR TRAC V-BIKE
®
SPINNER ® .