Schwinn NAUTILUS A10 - Manual (Page 13)

Leveling Leveling Leveling YYYour our our Bike Bike Bike
The levelers are the polygonal end caps on the Rear Stabilizer. Turn the end cap to adjust the level. Make sure the bike is level and stable before you exercise.
Moving Moving Moving YYYour our our Bike Bike Bike
Upright Upright Upright
To move the upright bike, carefully pull the Handlebars toward you while pushing
the front of the bike downward. Push the bike to the desired location.
Recumbent Recumbent Recumbent
To move the recumbent bike, carefully lift the rear end of the bike and
slowly push the bike to the desired location.
NOTICE: Be careful when you move the bike. All abrupt motions can affect the computer operation.
TTTroubleshooting roubleshooting roubleshooting
Problem Problem Problem Check Check Check Solution Solution Solution
If bike has AC adapter, check electrical (wall) outlet Make sure unit is plugged into a functioning wall
outlet.
If bike has AC adapter, check connection at unit Connection should be secure and undamaged. Replace
adapter or connection at unit if either are damaged.
If bike has batteries, check Battery Indicator on console
or check batteries.
Replace the batteries. It may be necessary to replace
the batteries although the Battery Indicator is not on.
Check data cable integrity All wires in cable should be intact. If any are visibly
crimped or cut, replace cable.
Check data cable connections/orientation Make sure cable is connected securely and oriented
properly. Small latch on connector should line up and
snap into place.
Check console display for damage Check for visual sign that console display is cracked or
otherwise damaged. Replace Console if damaged.
No display/partial display/unit will not turn on
13 13 13