Sangean DT-400W - Manual (Page 10)

9
Battery Installation
Turn radio off.
Prepare replacement batteries to ensure a quick and
easy change. Failure to change batteries within
1 minute will reset presets and clock settings.
The battery cover is located on the back of the unit.
Apply a gentle downward pressure and slide the door
to the right side of the unit.
Place 2 ‘AA’ batteries inside the unit oriented
to the illustration located just below the
battery compartment.
NOTE:
A flashing “E” appearing on the LCD display indicates a
weak battery and that replacement of batteries is
required. And the Weather Alert will be deactivated.
Tuning the Radio
Seek Tuning
Turn radio on using the On/Off button located on the
top of the radio.
Select desired band by pressing the “Band” selector
on the front of the unit.
Press and hold the proper tuning button (Up/Down) for
approximately ½ second. Radio will seek for next
active signal station.
Repeat as many times as desired.