Sanyo DRW-500 - Manual (Page 32)

-E31-
a
4
Menu
Play/Edit Disc
Record Program
Setup Menu
Press SETUP to exit
Recording Setup
DVD Control
General
Video
Audio
AV Select
5
a
Audio Setup
Digital Out
DRC
OFF
ON
Press SETUP to exit Current selection
Audio Setup
5
b Digital Out
DRC
OFF
ON
Press SETUP to exit Current selection
a
4
Audio Setup
Digital Out
DRC OFF
STD
TV
Press SETUP to exit Current selection
Audio Setup
5
b
Digital Out
DRC OFF
STD
TV
Press SETUP to exit Current selection
SETUP
4, 5, a, b
ENTER
Preparations
(Audio ---> Digital Out & DRC)
1. Select “Setup Menu” in “Menu” screen. See page E22.
Audio
Need help? Call
1-800-813-3435
2. Press [ENTER] (or [a]).
“Recording Setup” is highlighted.
3. Press [p] to select “Audio”.
4. Press [ENTER] (or [a]).
“Audio Setup” screen appears.
Setting “Digital Out”
If the coaxial or optical DIGITAL AUDIO OUT jack is connected
to the digital amplifier, you must set as follows:
1. Select “Digital Out”.
2. Press [ENTER] (or [a]) to select the sub menu.
3. Press [p] or [o] to select “ON” or “OFF”.
4. Press [ENTER]. “ √” appears.
5. Press [b] to return to “Digital Out”.
Setting “DRC (Dynamic Range Control)”
1. Select “DRC”.
5. Press [p] or [o] to select “Digital Out” or “DRC”.
2. Press [ENTER] (or [a]) to select the sub menu.
3. Press [p] or [o] to select “OFF, “STD” or “TV”.
OFF: Off position
STD: When connecting the amplifier to the AUDIO OUT
jacks (not DIGITAL AUDIO OUT jacks)
TV: When using 3 or 4 channel on TV
4. Press [ENTER].
“ √” appears.
5. Press [b] to return to “DRC”.
Notes:
•
Press [b] again to return to “Menu” screen.
• Press [SETUP] to close the screen.