Smeg UKVI144B - Manual (Page 2)

Instructions for Use 52
Before Putting Into Use
• Before connecting the appliance to the mains supply, leave it stand
for about 2 hours which will reduce the possibility of malfunctions in
the cooling system that might have occurred due to transport
handling.
• Clean the appliance thoroughly, especially the interior (see Cleaning
and Maintenance).
Instructions for Use
These instructions for use were prepared for the user. They describe
the appliance and its correct and safe use. They were prepared for
various types/models of appliances therefore you might find in it
description of some functions and accesories that do not apply to your
appliance.
Instructions
Integrated appliances are equipped with instructions for mounting the
appliance into the kitchen unit.
The appliance should be professionally mounted by qualified technician
and instructions are for his use only.
We Care for the Environment
• Our products use environmentally friendly packaging, which can be
either recycled or disposed of in an environmentally friendly manner.
To this end, individual packaging materials are clearly marked.
• These instructions are printed either on recycled paper or chlorine
free bleached paper.
• When your appliance finally wears out, please try not to burden the
environment with it; call your nearest authorised service agent. (See
Disposing of the Worn Out Appliance)
Tips for Energy Saving
• Try not to open the door too often, especially when the weather is wet
and hot. Once you open the door, mind to close it as soon as
possible. This is especially important if you have an upright model.
• Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
• Turn the thermostat knob from higher to lower setting as soon as
possible (depends on how loaded the appliance is, ambient
temperature...)