Shark EP709 - Manual (Page 2)

Changing the Post Motor
Filter
2. Remove the post motor filter from the
filter grill. (Fig. 6)
3. Rinse the post motor filter in lukewarm
water and let the post motor filter air
dry for 24 hours until it is completely
dry. (Fig. 7)
4. Replace the post -motor filter into the
filter grill and replace back into the
unit.
Fig. 7
Fig. 6
Changing the Post Motor
Filter
1. Remove the post motor filter cover that is
located the rear of the unit. (Fig. 5)
• Filter should be cleaned at least twice
a year or when it becomes visibly soiled.
• Always operate the cleaner with the post
motor filter installed.
• Disconnect from electrical outlet before
cleaning the filter.
• Do not use a washing machine to rinse
the filter.
• Do not use a hair dryer to dry it.
• Always allow 24 hours to air dry.
Fig. 5
2. Remove the post motor filter from the
filter grill. (Fig. 6)
3. Rinse the post motor filter in lukewarm
water and let the post motor filter air
dry for 24 hours until it is completely
dry. (Fig. 7)
4. Replace the post -motor filter into the
filter grill and replace back into the
unit.
• Filter should be cleaned at least twice
a year or when it becomes visibly soiled.
• Always operate the cleaner with the post
motor filter installed.
• Disconnect from electrical outlet before
cleaning the filter.
• Do not use a washing machine to rinse
the filter.
• Do not use a hair dryer to dry it.
• Always allow 24 hours to air dry.
Fig. 7
Fig. 6
1. Remove the post motor filter cover that is
located the rear of the unit. (Fig. 5)
Fig. 5